D-Link DSL-200 Manual do Utilizador descarregar pdf (Página 27)

DSL-200 ADSL USB Modem User’s Guide

Connect to Internet - LAN Driver Users

If your ADSL connection uses either the RFC 1483 or the RFC 1577 protocol, you must set your own

TCP/IP configuration. The following information will be provided to you by your DSL service

provider:

üü IP Address

üü Subnet Mask

üü Gateway

üü DNS Host Name

üü DNS Domain

üü DNS Server

Windows 98 or Windows Me (LAN Driver)

Follow these steps if you are using the RFC 1483 or RFC 1577 protocol on a computer running

Windows 98 or Windows Me.

1. From the Start menu, select Settings, Control Panel, and then double-click on the Network

icon.

2. The Network window appears. Select the Configuration tab, scroll down the installed

network components list and click on TCP/IPàà D-Link DSL-200 USB ADSL Modem

3. Click the Properties button.

4. The TCP/IP Properties window will appear. Select the IP Address tab and then select the

Select an IP address option. Enter the IP Address and Subnet Mask settings given to

you by your ISP or ADSL service provider.

5. Select the Gateway tab and enter the IP settings in the New gateway field. Click Add.

6. Select the DNS Configuration tab. Select the Enable DNS option.

7. Type in your host name in the Host: field.

8. Type in your domain name in the Domain: field.

9. Enter the DNS settings in the DNS Server Search Order field and click Add. If you have

more than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed

here.

10. After all the TCP/IP information has been entered, click OK.

11. The Network window again appears, click OK.

12. The System Settings Change window appears. You need to restart your computer for the

changes to go into effect. Click Yes.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Sem comentários

D-Link DSL-200 Manual do Utilizador Página 27