D-Link xStack Instruções de Operação descarregar pdf (Página 140)

DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual

Reboot System

The following menu is used to restart the Switch.

Figure 10- 28. Reboot System window

Clicking the Yes click-box will instruct the Switch to save the current configuration to non-volatile RAM before restarting

the Switch.

Clicking the No click-box instructs the Switch not to save the current configuration before restarting the Switch. All of the

configuration information entered from the last time Save Changes was executed, will be lost.

Click the Restart button to restart the Switch.

Save Changes

The Switch has two levels of memory, normal RAM and non-volatile or NV-RAM. Configuration changes are made

effective clicking the Apply button. When this is done, the settings will be immediately applied to the switching software

in RAM, and will immediately take effect.

Some settings, though, require you to restart the Switch before they will take effect. Restarting the Switch erases all

settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting changes to NV-

RAM before rebooting the switch.

To retain any configuration changes permanently, click on the Save button in the Save Changes page, as shown below.

Figure 10- 29. Save Changes screen

139

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 185 186

Sem comentários

D-Link xStack Instruções de Operação Página 140