D-Link DI-304M Guia do Utilizador descarregar pdf (Página 35)

CopperHead 3400

User Guide

• CABLE OPEN - indicates that the high voltage cable is open or there is no high

voltage cable connected.

• Green when the cable is properly connected from the Base Station to the

camera.

• Red when there is no cable connected to the camera or the cable is connected

but open.

High voltage will not be applied to the camera until the open condition is

corrected.

• CABLE SHORT - indicates that the high voltage cable connected is shorted.

• 18 - Power Switch & Power Indicator: toggle switch to enable or disable Base Station

power.

LED turns Green when on/off switch is changed to the ON position. With a hybrid

power system (power supplied by the Base Station), this switch will control power to

the Camera and the Camera Unit.

For the hybrid system to be properly powered, the AC Mains switch on the rear of Base

Station must be in the ON position.

Base Station Rear Panel

Fig. 3-21: CopperHead 3400 Base Station Back Panel

• A - Power & Fiber Connectors (see Rear Panel Section A - Power & Fiber Connectors

(Power Module) on page 30)

• B - Sync/Data/Control Connectors (see Rear Panel Section B – Sync/Data/Control

Connectors on page 32)

•

C - Video/Ethernet Connectors (see Rear Panel Section C – Video/Ethernet Connectors

on page 32)

•

D - Audio/Intercom Connectors (see Rear Panel Section D – Audio/Intercom Connectors

on page 33)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 116 117

Sem comentários

D-Link DI-304M Guia do Utilizador Página 35