D-Link DSL-310 Manual do Utilizador descarregar pdf (Página 22)

22D-Link DVS-310-1 User Manual

Network Setup

LAN Settings:

DHCP:

Static IP

Address:

IP Address:

Subnet Mask:

Default Gateway:

Primary DNS:

Secondary DNS:

Enable UPnP:

Enable UPnP

Port Forwarding:

Settings for your local area network.

Select this connection if you have a DHCP server running on your

network and would like your Video Encoder to obtain an IP address

automatically.

You may obtain a static or xed IP address and other network

information from your network administrator for your Video Encoder.

A static IP address may simplify access to your Video Encoder in

the future.

Enter the xed IP address in this eld.

This number is used to determine if the destination is in the same

subnet. The default value is 255.255.255.0.

The gateway used to forward frames to destinations in a different

subnet. Invalid gateway settings may cause the failure of

transmissions to a different subnet.

The primary domain name server translates names to IP addresses.

The secondary DNS acts as a backup to the primary DNS.

Enabling this setting allows your Video Encoder to be congured as

a UPnP device on your network.

Enabling this setting allows the Video Encoder to add port forwarding entries into the router automatically on a UPnP

capable network.

Use this section to congure the network connections for your Video Encoder. All relevant information must be entered accurately.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 58 59

Sem comentários

D-Link DSL-310 Manual do Utilizador Página 22