D-Link DSS-24+ Guia do Utilizador descarregar pdf (Página 13)

DSS-24 10/100 Auto Negotiation Switch User’s Guide

Installing the DSS-16 and DSS-24

Installation Options

There are two options for installing the DSS-24: desktop/shelf installation or rack

installation. The procedures for each are explained in the following sections.

The following tools and materials may be necessary to install the DSS-24:

• Screwdriver to install the brackets as needed.

• Wire cutters to cut cable as needed for network connections.

• Crimpers to crimp cable as needed.

• RJ-45 connectors as needed.

Desktop/Shelf Installation

The dimensions of the DSS-24 are: 441 mm (17.44 inches) x 235 mm (9.25

inches) 63 mm (2.44 inches). The measurements include the 8 mm (.31 inch)

rubber feet.

Follow these guidelines for desktop/shelf installation or rack installation:

• The surface must support 3 kg (6.6 lbs).

• The power source must be within 1.82 m (6 feet).

• Power cord and cables should never be stretched.

• Leave at least 5 cm (two inches) around the DSS-24 for

ventilation.

Follow these steps to install the DSS-24 on a desktop or shelf:

1. Place the four rubber feet at the corners of the DSS-24, see Figure

2. Place the DSS-24 on the desktop/shelf, see Figure 5.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

Sem comentários

D-Link DSS-24+ Guia do Utilizador Página 13