D-Link 900W - DCS Network Camera Especificações Página 1

6 Auto-Run Installation Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. The content of the Installa

7 Quick Installation Click the Start button to start the Quick Installation.

8 Follow the simple steps below to quickly install the device, click NEXT>>.

9 After done the connection of Ethernet cable, click NEXT>>.

10 Follow the instruction below to power up the device, and then click NEXT>>.

11 Then the system will automatically search the device.

12 Select your camera’s MAC ID from the MAC ID List, and then click NEXT>>.

13 DCC (D-Link Click’n Connect) will auto-detect whether your Internet connection with or without DHCP and diagnose that if DHCP is also available for

14 Without DHCP: If DHCP is not available for your network and IP camera, the following screen will show up to allow you select Fixed IP Address or PP

15 When Fixed IP Address is selected for your Internet connection, you need to fill the IP information in the related fields, and then click NEXT>&

i Table of Content Package Contents ...

16 The installation is now complete. You may click ADVANCED Options to enter your IP camera’s Web Configuration or EXIT to leave the screen.

17 For PPPoE: Select PPPoE option and click NEXT>> button.

18 Enter Username and Password that are supplied by your ISP in the related fields and click NEXT>>.

19 The installation is now complete. You may click ADVANCED Options to enter your IP camera’s Web Configuration or EXIT to leave the screen.

20 Multicamera Management Click Multicamera Management of the Installation CD.

21 Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Click Next.

22 Click Yes.

23 Click Next.

24 Click Finish.

25 Be aware that the Setup Wizard is offered for you to do configuration of your camera in the future only. Not necessary to run the Setup Wizard for

ii Assigning and Opening the HTTP Port on the DCS-900 ...

26 You must change the Admin ID and Password immediately to protect your camera against unauthorized access. By default, the Admin ID and Password are

27 Enter an IP Address and Subnet Mask for your camera if you want to change the current settings. Enter your Gateway and DNS settings. These settings

28 If you need to make any changes, click Back to modify your settings. Otherwise, click Restart to save your settings.

29 Your setup is now complete! Click Link to launch your web browser and view your images.

30 Using the Configuration Menu After completing the Setup Wizard, you are ready to use your camera. The Web configuration utility is designed to easi

31 LIVE VIDEO This section allows you to display your IP camera's live video by using Activex or Java. LIVE VIDEO > Camera y Please make su

32 SETUP This section allows you to further set up or change the configuration of your IP camera. SETUP > Network Setup This option, Network Setu

33 IP Address Mode – y Fixed IP/ DHCP: If you are using a LAN connection, select either DHCP Connection or Static IP Address. If manually assigning

34 SETUP > Dynamic DNS If you have a DSL or Cable service provider that changes your modem IP address periodically, Dynamic DNS (Domain Name Servic

35 SETUP > Video This Video option allows you to set up your IP camera’s video quality, resolution, and Frame rate. After done the configuration, y

iii Uninstall IPView SE ...

36 Auto. y Brightness Control: Allows you to adjust the brightness level. The default setting is 64. y Contrast Control: Allows you to adjust the con

37 SETUP > Mail This option allows you to configure mail settings. If you want to specify the IP camera email settings, you may check By E-mail che

38 E-Mail Account – y SMTP Server Address: The domain name or IP address of external mail server. y Sender e-mail Address: The e-mail address of the

39 SETUP > FTP This option is used to set up FTP upload configuration.

40 FTP Server – y Host Address: This is the IP address of the FTP server that you will be connecting to. y Port Number: Default is port 21. If change

41 SETUP > Time and Date This option allows you to configure, update, and maintain the correct time on the internal system clock. From this section

42 MAINTENANCE MAINTENANCE > Device Management To ensure the highest security and prevent unauthorized usage of your IP camera, the Administrator h

43 Password Setting – y Admin: Allow you to specify and save the Administrator’s ID name and password. System Setting – y Camera Name: Allow you to

44 MAINTENANCE > Backup and Restore The Backup and Restore option not only allows you to save the current configuration in a computer for backup by

45 MAINTENANCE > Firmware Update The Firmware Update option displays you the current firmware’s information of your IP camera, and also allows you

1 Package Contents 　  D-Link DCS-900 Wired Network Camera  Power Adapter (5.0V, 2.5A)  CAT5 Ethernet Cable  Camera Stand  CD-ROM with Software an

46 STATUS The Status section provides the detail information about your IP camera. STATUS> Device Info The Device Info option lists the following

47 HELP The Help screen provides you brief information about the DCS-900 for your reference.

48 Installing the DCS-900 Behind a Router Assigning and Opening the HTTP Port on the DCS-900 (For Installing Multiple Cameras) Opening ports will allo

49 Router Setup and Installation The following steps generally apply to any router that you have on your network. The D-Link DIR-300 is used as an exa

50 Assigning and Opening Virtual Server Ports 2) Open Virtual Server Ports To Enable Remote Image Viewing The Virtual Server Ports of your router must

51 Viewing Your Camera After all settings have been entered correctly, a user inside or outside your network will have access to the camera through a

52 IPView SE Application Installation Click IPView SE of the Installation CD. IPView SE software is included for administrators to manage up to 4

53 Click Next.

54 Click Yes.

55 Click Next.

2 Features and Benefits  Simple to Use - The DCS-900 is a stand-alone system with a built-in CPU, requiring no special hardware or software such as

56 Click Finish.

57 After successfully installing the IPView SE, the application program for the DCS-900 is automatically installed to \Programs\IPView SE Directory. T

58 IPView SE This section describes the operation of the IPView SE application user interface with detailed procedures for using the application. IPVi

59 IPView SE Icon Description

60 How to Add a New Camera To add a new camera, select the Camera button from the IPView SE. Make sure that the green lights are on when clicking t

61 If you are unsure of the IP Address of the camera, you can click on Search to search for all available cameras that are installed on your local are

62 How to Delete a Camera Click the Liberate Camera button on the IPView SE, while you are connected to the camera you would like deleted. The IPView

63 How to Change the IP Address To change a camera’s IP Address, you must highlight the camera you wish to change. Click the Change IP Address button

64 How to Format the Camera View Select the Combine button on the IPView SE and you should see all four cameras combined (see image below). A maxim

65 How to Rotate the View In View Mode format, click on the Rotate button and the image should rotate 90° to the left (see image below).

3 Hardware Overview Connections LEDs

66 View/List Click the View/List button . All the cameras and their properties, such as the camera name IP Address, user name, and functional informa

67 Color Setting Click the Color Setting button to adjust the Brightness, Contrast, and Hue. Wake Up Control Panel Click the Wake Up Control Panel b

68 How to take a Snap-Shot with the Camera In View Mode format select the Snapshot button located on the upper left corner of the screen. A Save Ima

69 How to Start Recording To start recording with a camera, click the Manual Recording button . An AVI file will appear in your IPView SE folder. NOT

70 Motion Setting Click the Motion Setting button to setup the options for motion recording. On this screen you can select to Invoke Alarm and/or Sen

71 Manual Recording Click the Manual Recording button to begin recording images from you camera. Schedule Recording Click the Schedule Recording but

72 Select Date Mode and enter in the Start date/time, and Stop date/time. The camera will start to record according to the specified date and time pe

73 Motion Recording Clicking on the Motion Recording button will record images upon motion detection. When this option is selected and the camera det

74 Scan Click the Scan button to display each camera one by one. When this option is selected the camera(s) will briefly display their images in the

75 Play Click the Play button to playback video recorded from your camera.

4 Hardware Installation Attach the Swivel Stand Locate the stand mount on the bottom panel of the DCS-900 and screw on the swivel stand to the base of

76 System Configure Click the System Configure button on the IPView SE. Profile: The DCS-900 will not have a profile to load initially, you will hav

77 Log Storage: The Single HDD Reserved Space option permits reserved HDD space from 500 MB to 1000 MB. The Split Recording File option is used to

78 To modify the storage, click the Modify button. You should see the storage dialog box again. To delete a record of storage, select the path and c

79 the amount of space left on your drive before overwrite takes place. For instance if you select 1000 MB and your total hard drive space is 3000MB,

80 About Click the Help/About icon, and then select About for camera details such as software version.

81 Uninstall IPView SE Click on Start MenuÆ ProgramsÆ IPView SEÆ Uninstall IPView SE. A new prompt screen will be displayed like the one below confirm

82 Frequently Asked Questions Wired Network Camera Features 1 What is an Internet Camera? The Internet Camera is a standalone system connecting direct

83 Wired Network Camera Installation 11 Why does the Power LED not light up constantly? The power supply used might be at fault. Confirm that you are

84 How to Ping Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP Address is accessible by sending a packet

85 If you fail to connect to your camera you will see the following: Check to see if you have entered your camera’s IP Address correctly or reassign

5 Security To ensure the highest security and prevent unauthorized usage of the DCS-900, the Administrator has the exclusive privilege to create all u

86 Adjusting the Camera Focus To help you get the best image quality, keep in mind that while adjusting the DCS-900 focus you can preview the image qu

87 Technical Specifications Network • TCP/IP (DHCP or Static IP Address) • Wired LAN: 10/100Mbps Web Access Requirements • Any Java-Enabled or

88 Power Source: • 5V, 2.5A Power Consumption • 5W Environmental specification • Operating temperature: 5°C to 50°C • Storage temperature: -25°