D-Link DSL-100D - 8 Mbps DSL Modem Guia do Utilizador Página 82
- Página / 92
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Computer
#1
10.1.1.2 255.0.0.0 10.1.1.1
Computer
#2
10.1.1.3 255.0.0.0 10.1.1.1
Computer
#3
10.1.1.4 255.0.0.0 10.1.1.1
Please note that when using the default IP address as in the above example, the first three numbers in
the IP address must always be the same with only the fourth number changing. The first three numbers
define the network IP address (all machines must belong to the same IP network), while the last
number denotes the host IP address (each computer must have a unique address to distinguish it on the
network). The IP address scheme used in Example #1 can be used for any LAN that requires up to 253
separate IP addresses (excluding the Router). Notice that the subnet mask is the same for all machines
and the default gateway address is the LAN IP address of the Router.
It is a good idea to make a note of each device’s IP address for reference during troubleshooting or
when adding new stations or devices.
Using DHCP
The second way to use the default settings is to allow the Router to automatically assign IP settings for
workstation using DHCP. To do this, simply make sure your computers’ IP addresses are set to 0.0.0.0
(under Windows, choose the option Obtain an IP address automatically in the TCP/IP network
component described above). When the computers are restarted, their IP settings will automatically be
assigned by the Router. The Router is set by default to use DHCP. See the discussion in Chapter 5 for
information on how to use configure the Router for DHCP.
Changing the IP Address of the Router
When planning your LAN IP address setup, you may use any scheme allowed by rules that govern IP
assignment. It may be more convenient or easier to remember an IP scheme that use a different
address for the Router. Or you may be installing the Router on a network that has already established
the IP settings. Changing the IP address is a simple matter and can be done using the web manager
(see LAN IP Address in Chapter 5). If you are incorporating the Router into a LAN with an existing IP
structure, be sure to disable the DHCP function. Also, consider the effects of the NAT function which
is enable by default.
An IP addressing scheme commonly used for Ethernet LANs establishes 10.0.0.1 as the base address
for the network. Using Example #2 below, the Router is assigned the base address 10.0.0.1 and the
remaining addresses are assigned manually or using DHCP.
IP Setup - Example #2
Alternative IP Assignment
Host IP Address Subnet Mask Gateway
IP
Router
10.0.0.1 255.0.0.0
Computer
#1
10.0.0.2 255.0.0.0 10.0.0.1
82
- DSL-G604T 1
- Wireless ADSL Router 1
- User’s Guide 1
- FCC Warning 2
- CE Mark Warning 2
- Warranty and Registration 3
- TABLE OF CONTENTS 4
- About This User’s Guide 6
- Before You Start 6
- Installation Requirements 6
- Record your info here 7
- Introduction 8
- Front Panel 11
- Rear Panel 12
- Wireless LAN Basics 12
- About 802.11g Wireless 13
- Hardware Installation 15
- Factory Reset Button 18
- Power On Router 18
- WAN Configuration Summary 19
- Configure IP Settings 20
- Windows Me 22
- Windows NT 4.0 23
- Figure 3-2. Home – Setup 25
- Wireless 30
- WAN Configuration 31
- ATM VC Setting 33
- Dynamic IP Address 34
- Static IP Address 35
- Bridge Mode 38
- LAN Configuration 41
- Figure 4- 11. DNS window 43
- Dynamic DNS 44
- Advanced Configuration 45
- Virtual Server 46
- LAN Clients 46
- Figure 5- 4. SNMP window 48
- Filters 49
- Bridge Filters 50
- Routing 50
- Firewall 52
- Figure 5- 9. Firewall window 53
- Figure 5- 10. RIP window 54
- ATM VCC 56
- Wireless Management 57
- Wireless Performance 60
- Remote Log 64
- Firmware 67
- Miscellaneous 68
- Device Info 71
- DHCP Clients 72
- Statistics 75
- Figure 7- 8. Help Window 78
- Technical Specifications 79
- IP Address Setup 81
- IP Concepts 84
- Microfilters and Splitters 88
- Line Splitter Installation 89
- International Offices 90
- Registration Card 91
Manuais e produtos relacionados com Pontos de acesso WLAN D-Link DSL-100D - 8 Mbps DSL Modem
Pontos de acesso WLAN D-Link DWL-7200AP - AirPremier AG - Wireless Access Point Manual do Utilizador
(193 páginas)
(193 páginas)
Pontos de acesso WLAN D-Link DWL-2700AP - AirPremier Outdoor Wireless Access Point Especificações
(34 páginas)
(34 páginas)
Pontos de acesso WLAN D-Link DWL-3260AP - AirPremier - Wireless Access Point Especificações
(109 páginas)
(109 páginas)
ARTHUR MARTIN ELECTROLUX AW2126F Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein ARTHUR MARTIN ELECTROLUX AW2126F.
Wir stellen 5 PDF-Handbücher ARTHUR MARTIN ELECTROLUX AW2126F zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais