D-Link DWL-1000AP+ Guia de Instalação

ManualBuilding Networks for People AirPremier D-Link Enterprise 2.4GHz Wireless Access PointDWL-1000AP+

10Wireless Basics (continued)Installation ConsiderationsKeep in mind that the number, thickness and location of walls, ceilings, or other objects that

11 Here is a sample of a network setup using the 802.1x compliant DWL-1000AP+ access point. Your network may look different. For successful communicat

12Using the Configuration MenuThere are several methods of managing your network with the DWL-1000AP+. You can use the web-based configuration that is i

13AP Name: You may choose to rename your Access Point, especially if you have more than one Access Point on your network.SSID: (Service Set Identifie

14Home > LANUsing the Configuration MenuDynamic IP Address: Select this option if you would like to have an IP Address automatically assigned to th

15Using the Configuration MenuDHCP Server: Select Enabled or Disabled. Disabled is the default setting. If you want to use the Access Point as a DHC

16Using the Configuration MenuAdvanced > ModeLoad Balancing: Allow several DWL-1000AP+’s with the same group name to share the wireless network tra

17Using the Configuration MenuAdvanced > PerformanceThe default Performance settings are shown here.Beacon Interval: Beacons are packets sent by an

18Using the Configuration MenuAdvanced> FiltersSSID Broadcast: (Service Set Identifier) Enable or Disable (default) the broadcast of the SSID name ac

19Using the Configuration MenuAdvanced > 802.1xDisabled is the default selection for 802.1x protocol. Select Enabled to enable it.Encryption Key:

2ContentsPackage Contents ... 3Introduction ...

20Using the Configuration MenuTools > AdminSNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol. The

21Using the Configuration MenuTools > SystemSave Settings: The current system settings can be saved as a file onto the local hard drive. Load Setting

22Using the Configuration MenuTools > FirmwareFirmware UpgradeYou can upgrade the firmware of the Access Point at this page. Make sure the firmware y

23Using the Configuration MenuStatus > LogView LogThe Access Point keeps a running log of events and activities occurring on the AP. If the device

24Using the Configuration MenuStatus> StatsTraffic StatisticsThe Access Point keeps statistics of traffic that passes through it. You are able to view

25Using the Configuration MenuHelpSelect from the menu above for extra help.

26 Check that the Ethernet LED on the DWL-1000AP+ is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely in

272. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joine

28 Assigning a Static IP Address in Windows XP/2000Note: Residential Gateways/Broadband Routers will automatically assign IP Ad-dresses to the com

29 Click on Internet Protocol (TCP/IP) Click Properties  Double-click on PropertiesRight-click on Local Area Connections Assigning a Static IP

3Contents of Package: D-Link AirPremier DWL-1000AP+ Enterprise 2.4 GHz Wireless Access Point Manual and Warranty on CD Quick Installation Guide

30IP Address:e.g., 192.168.0.2Subnet Mask:255.255.255.0 In the window below, select Use the following IP address. Input your IP address and subnet mas

313. Check that the drivers for the network adapters are installed properly.• Double-click on Network Adapters• Right-click on D-Link AirPro

32Double-click on Network AdaptersRight-click on D-Link DFE-530TX+ Ethernet PCI AdapterSelect Proper-ties to check that the drivers are installed pro

33• Locate the Reset button on the back of the DI-764• Use a paper clip to press the Reset button. • Hold for about 10 seconds and then release •

347. Why is load balancing not working properly within a group of access points?Check that the access points are connected through the ethernet cable

35Technical SpecificationsStandards Diagnostic LEDTemperaturePhysical Dimensions:L = 9.25 inches (233 mm)W = 6.5 inches (165 mm)H = 1.38 inches

36 Technical Specifications 1, 2, 5.5, 11Mbps (22Mbps in proprietary Turbo mode) Data Rates:* (with Automatic Fallback) Supports 64-bit, 128-bi

37 Contacting Technical SupportYou can find the most recent software and user documentation on the D-Link website.D-Link provides free technical su

38Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the per

39 After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that

4IntroductionThe D-Link AirPremier DWL-1000AP+ Wireless Access Point is an 802.1x high-performance wireless access point. With a second lev

40Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of

5Features and Benefits802.1x Authentication requires EAP (Extensible Authentication Protocol). 802.1x supported EAP is available through the Windows

6LEDsAfter the initial post sequence, upon startup, the LEDs will read as follows:WLAN (Wireless Local Area Network)-A solid green light indicates tha

7D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, bus

8Wireless Basics (continued)People use wireless LAN technology for many different purposes:Mobility - Productivity increases when people have access t

9The DWL-1000AP+ is compatible with the following D-Link AirPro dual-band wireless network adapters: 2.4GHz multimode Wireless Cardbus Adapter used