D-Link DI-304M Guia do Utilizador descarregar pdf (Página 91)

Base Station Connectors

Reference Numbers refer to the Overview Diagrams at the end of this User Guide.

Item Description

ACPowerInputConnector‐ModelsCHG3‐BS‐3400‐95VD‐xxx‐xxx

Base Station #1

Standard IEC C14 receptacle

Panel Mounted AC Power Receptacle: 110/220 VAC

Two 4 amp fuses (5 x 20mm).fuses are in operation at all

times – both the AC Line Hot and the AC Line Neutral

are fused.

12VDCInputPowerConnectors–ModelsCHG3‐BS‐3400‐2ST/2MX/NEU

Base Station #20

XLR4 Male

• Pin 1: Ground

• Pin 2: Unused

• Pin 3: Unused

• Pin 4: + Power 12 VDC

This matching connector is from either an ADAP-AC-04

or a customer-supplied 12VDC power supply

This connector is wired in parallel with terminal block

#21 (below)

Base Station #21

Terminal block

• Pin 1: Minus Voltage Terminal

• Pin 2: Plus Voltage Terminal

This connector is wired in parallel with XLR4 Male #20

(above).

95VDCoutput:ModelCHG3‐BS‐3400‐95VD‐STM‐xxx

Base Station #23

Mating connector:

Molex 39-01-4051

• Pin 1: 95VDC + OUT (White*)

• Pin 2: 95VDC + OUT (Black*)

• Pin 5: Ground (Green)

*Tied together at terminal lug end

BaseRemote

Base Station #9

DB9 Female

Format select (Pin 2)

Floating for RS-422 or TTL

Tie to GND (pin 3) for RS-232

Tie to +12VDC (pin 4) for RS-485

• Pin 1: Data 1 -422 In, -485 I/O

• Pin 2: Data 1 Format Select

• Pin 3: GND (Ground)

• Pin 4: +12 VDC Bias for Data 1 Format Select

• Pin 5: Data 1 -422 Out

• Pin 6: Data 1 232 In, +422 In, +485 I/O

• Pin 7: - 12 VDC Camera Control Data Power Ground

• Pin 8: +12 VDC Camera Control Data Power

• Pin 9: Data 1 232 Out, +422 Out

Please See Available Accessories on page 96 for a list of

Grass Valley, a Belden Brand supplied cables.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 116 117

Comentários a estes Manuais

Sem comentários

D-Link DI-304M Guia do Utilizador Página 91

Comentários a estes Manuais

Manuais e produtos relacionados com Redes D-Link DI-304M