D-Link DSA-3200 Manual do Utilizador descarregar pdf (Página 22)

EXAMPLE 4 A scan command is executed with EU set to 0, BIN set to 0, and FORMAT

set to 1. Data are scrolled and will be displayed as follows:

Frame = <number> Time = <time> <µs or ms>

NOTE: If the sensor temperatures are less than 0 degrees C, the EU conversion will use the

last good set of coefficients. No errors will be logged. If this condition might exist,

a user must monitor the sensor temperatures in the data output.

COMMAND SCAN TRIGGER

COMMAND SYNTAX TRIG

ARGUMENTS None

DESCRIPTION This command acts as a software trigger to the DSA. W hen XSCANTRIG

is set to 1, an averaged frame of data will be output when the DTS receives

the TRIG command or a <TAB> character code (9 HEX or Control I). This

will continue until a STOP command is issued or the Frames per Scan

variable is met. The data format will depend upon the setting of EU, BIN and

FORMAT.

EXAMPLE A scan command is executed with EU set to 1, BIN set to 0, XSCANTRIG

set to 1, and FORMAT set to 0. The DSA will wait for a Hardware trigger, the

TRIG command or a <TAB> character (9 HEX or Control I). W hen one of

the Data are scrolled and will be displayed as follows:

Frame # <number>

Time <time> <µs or ms>

“ “

” ”

For information on other formats, refer to the SCAN command .

COMMAND SET

COMMAND SYNTAX SET <name> <value>

ARGUMENTS <name> - the Configuration Variable to be set or modified.

<value> - the value of that Configuration Variable

DESCRIPTION Commands the DSA to set one of the many Configuration Variables.

Configuration Variables are described in a subsequent section.

NOTE Listing the Configuration Variables with the LIST command outputs the data

in the format required by the SET command. This enables the user to

upload data from a file that has been created by a LIST download.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Sem comentários

D-Link DSA-3200 Manual do Utilizador Página 22