D-Link DSA-3200 Informações Técnicas descarregar pdf (Página 197)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

183

Figure 6 - 63. JWAC Port Settings window

The following parameters can be configured:

Parameter Description

From Port / To Port

Use this drop-down menu to select a range of ports to be enabled as JWAC ports.

State

Use this drop-down menu to enable the configured ports as JWAC ports.

Max Authenticating

Host (1-10)

This parameter specifies the maximum number of host process authentication attempts

allowed on each port at the same time. The default value is 10. Enter a value between 1 and

10 attempts.

Aging Time (1-1440)

This parameter specifies the time period during which an authenticated host will remain in the

authenticated state. Enter a value between 0 and 1440 minutes or tick the Infinite check box.

The default value is 1440. A value of 0 indicates the authenticated host will never age out on

the port.

Block Time (0-300)

This parameter is the period of time a host will be blocked if it fails to pass authentication.

Enter a value between 0 and 300 seconds. The default value is 0.

Idle Time (1-1440)

If there is no traffic during the Idle Time parameter, the host will be moved back to the

unauthenticated state. The default value is infinite. To change this value, first untick the

Infinite check box and then enter a value between 0 and 1440 minutes. A value of 0

indicates the Idle state of the authenticated host on the port will never be checked.

Click Apply to implement changes made.

JWAC User Settings

Users can configure JWAC user settings for the Switch.

To view the following window, click Security > Japanese Web-based Access Control (JWAC) > JWAC User Settings:

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 320 321

Sem comentários

D-Link DSA-3200 Informações Técnicas Página 197