D-Link DSA-3200 Informações Técnicas descarregar pdf (Página 242)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

228

Offset 48-63 - Enter a value in hex form to mask the packet from byte 48 to byte 63.

Offset 64-79 - Enter a value in hex form to mask the packet from byte 64 to byte 79.

Time Range

Name

Tick the check box and enter the name of the Time Range settings that has been previously

configured in the Time Range Settings window. This will set specific times when this access

rule will be implemented on the Switch.

Ports

Ticking the All Ports check box will denote all ports on the Switch.

Click Apply to implement the changes.

To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU Access

Rule List window to view the following window:

Figure 7 - 43. CPU Access Rule Detail Information window for Packet Content

Time Range Settings

In conjunction with the Access Profile feature, the time range settings determine a starting point and an ending point, based on

days of the week, when an Access Profile configuration will be enabled on the Switch. Once configured here, the time range

settings are to be applied to an access profile rule using the Access Profile table. The user may enter up to 64 time range entries on

the Switch.

To view the following window, click ACL > Time Range Settings:

Figure 7 - 44. Time Range Settings window

The user may adjust the following parameters to configure a time range on the Switch:

Parameter Description

Range Name

Enter a name of no more than 32 alphanumeric characters that will be used to identify this time

range on the Switch. This range name will be used in the Access Profile table to identify the

access profile and associated rule to be enabled during this time range.

Hours

This parameter is used to set the time in the day that this time range is to be enabled using the

following parameters:

• Start Time - Use this parameter to identify the starting time of the time range, in hours,

minutes and seconds, based on the 24-hour time system.

•

End Time - Use this parameter to identify the ending time of the time range, in hours,

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 320 321

Sem comentários

D-Link DSA-3200 Informações Técnicas Página 242