D-Link DSA-3200 Informações Técnicas Página 210

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 321
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 209
xStack
®
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
196
The following parameters may be viewed or modified:
Parameter Description
LBD State
Use the drop-down menu to enable or disable loopback detection. The default is Disabled.
Mode Use the drop-down menu to toggle between Port-based and VLAN-based.
Trap Status Set the desired trap status: None, Loop Detected, Loop Cleared, or Both.
Interval (1-32767)
The time interval (in seconds) that the device will transmit all the CTP (Configuration Test
Protocol) packets to detect a loop-back event. The valid range is from 1 to 32767 seconds.
The default setting is 10 seconds.
Recover Time (0 or 60-
1000000)
Time allowed (in seconds) for recovery when a Loopback is detected. The Loopdetect
Recover Time can be set at 0 seconds, or 60 to 1000000 seconds. Entering 0 will disable
the Loopdetect Recover Time. The default is 60 seconds.
From Port / To Port
Use the drop-down menus to select a range of ports to be configured.
State Use the drop-down menu to toggle between Enabled and Disabled.
Click Apply to let the changes take effect.
Traffic Segmentation
Traffic segmentation is used to limit traffic flow from a single or group of ports, to a group of ports. This method of segmenting
the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that
does not increase the overhead of the Master switch CPU.
To view the following window, click Security > Traffic Segmentation:
Figure 6 - 80. Traffic Segmentation window
To configure traffic segmentation on the Switch, first specify the Source Ports using the From and To drop-down menus at the top
of the window. Next, specify which ports on the Switch are able to receive packets from the port(s) specified in the first step.
Vista de página 209
1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 320 321

Comentários a estes Manuais

Sem comentários