D-Link DSA-3200 Informações Técnicas descarregar pdf (Página 47)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

Figure 2 - 40. SNMP Community Table window

The following parameters can be set:

Parameter Description

Community Name

Type an alphanumeric string of up to 32 characters that is used to identify members of an

SNMP community. This string is used like a password to give remote SNMP managers access

to MIB objects in the Switch’s SNMP agent.

View Name

Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB

objects that a remote SNMP manager is allowed to access on the Switch. The view name must

exist in the SNMP View Table.

Access Right Read Only – Specifies that SNMP community members using the community string created

can only read the contents of the MIBs on the Switch.

Read Write – Specifies that SNMP community members using the community string created

can read from, and write to the contents of the MIBs on the Switch.

To implement the new settings, click Apply. To delete an entry from the SNMP Community Table, click the Delete button

corresponding to the entry to delete.

SNMP Host Table

Users can set up SNMP trap recipients for IPv4.

To view the following window, click Configuration > SNMP Settings > SNMP Host Table:

Figure 2 - 41. SNMP Host Table window

The following parameters can set:

Parameter Description

Host IP Address

Type the IP address of the remote management station that will serve as the SNMP host for

the Switch.

SNMP Version V1 – To specify that SNMP version 1 will be used.

V2c – To specify that SNMP version 2c will be used.

V3-NoAuthNoPriv – To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 320 321

Sem comentários

D-Link DSA-3200 Informações Técnicas Página 47